AII26025 Roof Rack Cross Bars HONDA ODYSSEY INSTALLATION

INSTALLATION
NOTE:
•Wipe the roof rails clean before installing the cross bars.
•Be careful not to damage the body paint.
1.Insert a small flat-tip screwdriver into the hole on the inside of the roof rail base and release the retaining tab, then remove the front cover.

3.Repeat steps 1 and 2 for the other roof rail.
4.Slide each holder back, and align the hole in the holder with the mark on the inside of the roof rail.

Position the cross bars on the holders, and install
the special bolts with washers. Tighten the bolts
securely.
6.Reinstall the front covers on the roof rails.
USE AND CARE
•Check the roof rack cross bar mounting bolts
frequently, and retighten them if necessary.
•Distribute the weight of the cargo evenly, and do not exceed the maximum weight capacity of
150 lb (68 kg).

DOWNLOAD

This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s