Manual Hitch Toyota Prius Installation

INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser.

If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.’s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
2,000200
21
15
TOYOTA PRIUS
7/02/2009
11469
30
Parts List
DESCRIPTION PART NUMBER QTY ITEM
HEX BOLT M12 – 1.25 x 40 HEX 4 1
CONICAL TOOTHED WASHER 1/2″ 4 2
EXISTING BOLTS
(RETURN TO OWNER)
EXISTING TOW LOOP
(RETURN TO OWNER)
FASCIA TRIM
DRIVER SIDE
FRAME RAIL
PASSENGER SIDE
FRAME RAIL
EXISTING BOLTS
(RETURN TO OWNER)
EXHAUST BRACKET
EXHAUST
DESIGNED FOR USE WITH
BALL MOUNT D-55001
– LOWER EXHAUST
– NO DRILLING REQUIRED
TOOLS REQUIRED
RATCHET
TORQUE WRENCH
EXTENSION
17mm SOCKET
19mm SOCKET
1. Remove existing bolts from exhaust hanger and lower exhaust. Support exhaust as need to
prevent damage. Return bolts to owner.

2. Remove existing bolts from tow loop. Return tow loop and bolts to owner.
NOTE: Access bolts through tow loop cut out in fascia.

3. Position hitch by raising the driver side plate through the tow loop cut out and up against the
frame rail. Secure using a M12 – 1.25 X 40mm bolts and 1/2″ conical toothed washers into
existing weldnuts as shown.

4. Sandwich the passenger side plate between the frame rail and exhaust bracket. Secure using
M12 – 1.25 X 40mm bolts and 1/2″ conical toothed washers as shown.

5. Torque all 12mm fasteners to 65 ft-lbs.

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
***DO NOT EXCEED VEHICLE MANUFACTURER’S RECOMMENDED TOWING CAPACITY.***
WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY AUXILIARY STABILIZING STRAPS.
** FAILURE TO PROPERLY SUPPORT NON-TRAILER LOADS WILL VOID PRODUCT WARRANTY**
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813

DOWNLOAD

This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s