Installation Instructions For BMW E46M3 & 3 Series E36 3 Series

Caliper Clearance Caliper Clearance Caliper Clearance Caliper Clearance Caliper Clearance
Most 17” wheels will clear the outer diameter of the caliper for a 328mm or 332mm rotor kit. For a 355mm kit, a minimum 18” wheel is typically required, and for a 380mm rotor kit, a minimum 19”
wheel is needed. The more critical clearance, however, is the gap between the spokes of the wheel
and the face of the caliper. Do not assume that a larger-diameter wheel will automatically clear the
face of the caliper.


Wheel Spacers Wheel Spacers Wheel Spacers Wheel Spacers Wheel Spacers
Wheel spacers can provide extra clearance to the outer face of the caliper. This will also space out the
entire wheel, widening the track width of the vehicle. Fender clearances should be checked on
lowered cars, and longer lug studs or wheel bolts are usually required.
Note: The Wheel Industry Council has issued guidelines advising that wheel spacers not be Note: The Wheel Industry Council has issued guidelines advising that wheel spacers not be Note: The Wheel Industry Council has issued guidelines advising that wheel spacers not be Note: The Wheel Industry Council has issued guidelines advising that wheel spacers not be Note: The Wheel Industry Council has issued guidelines advising that wheel spacers not be
used. It is the responsibility of the customer to ensure that wheel spacers are properly used. It is the responsibility of the customer to ensure that wheel spacers are properly used. It is the responsibility of the customer to ensure that wheel spacers are properly used. It is the responsibility of the customer to ensure that wheel spacers are properly used. It is the responsibility of the customer to ensure that wheel spacers are properly
specified and installed. specified and installed. specified and installed. specified and installed. specified and installed.

K K K K Kit I it I it I it I it Includes ncludes ncludes ncludes ncludes The F The F The F The F The Follo ollo ollo ollo ollowing wing wing wing wing
1 pair of ST-40, 4 Piston Calipers
1 set of high performance brake pads
1 pair of 332 x 32mm or 355 X 32mm AeroRotors™, mounted to anodized billet 7075-T6 alumi-
num hats, using floating drive pins and Inconel
® anti-rattle hardware
1 pair of 6061-T6 aluminum caliper adapter brackets, with stainless steel mounting studs pre-
installed using thread locker.
– 4ea. 7/16-20 Jet Nuts – 1 pair of stainless steel covered Teflon brake lines.
– 4ea.12mm washers – 1 pair of Banjo Bolts
– 2 pair of copper washers – 1 pair of rubber end caps
– 2 ty-wraps
3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799
http://www.stoptech.com 6
C C C C Caliper aliper aliper aliper aliper, H , H , H , H , Hat and B at and B at and B at and B at and Bracket F racket F racket F racket F racket Finish D inish D inish D inish D inish Disclaimer isclaimer isclaimer isclaimer isclaimer
Many wheel-cleaning solutions contain Many wheel-cleaning solutions contain Many wheel-cleaning solutions contain Many wheel-cleaning solutions contain Many wheel-cleaning solutions contain strong acids strong acids strong acids strong acids strong acids that may damage the finish on any that may damage the finish on any that may damage the finish on any that may damage the finish on any that may damage the finish on any
caliper or aluminum anodized finish, especially the plating on the hardware. Check for caliper or aluminum anodized finish, especially the plating on the hardware. Check for caliper or aluminum anodized finish, especially the plating on the hardware. Check for caliper or aluminum anodized finish, especially the plating on the hardware. Check for caliper or aluminum anodized finish, especially the plating on the hardware. Check for
adv adv adv adv adverse effects b erse effects b erse effects b erse effects b erse effects by tr y tr y tr y tr y trying a small amount of the cleaner in question on an inconspicuous ar ying a small amount of the cleaner in question on an inconspicuous ar ying a small amount of the cleaner in question on an inconspicuous ar ying a small amount of the cleaner in question on an inconspicuous ar ying a small amount of the cleaner in question on an inconspicuous area. ea. ea. ea. ea.
Avoid over spraying, and rinse cleaning solutions off as quickly as possible. Avoid over spraying, and rinse cleaning solutions off as quickly as possible. Avoid over spraying, and rinse cleaning solutions off as quickly as possible. Avoid over spraying, and rinse cleaning solutions off as quickly as possible. Avoid over spraying, and rinse cleaning solutions off as quickly as possible. STOPTECH will STOPTECH will STOPTECH will STOPTECH will STOPTECH will
not be held liable for damage to caliper not be held liable for damage to caliper not be held liable for damage to caliper not be held liable for damage to caliper not be held liable for damage to caliper, hat or br , hat or br , hat or br , hat or br , hat or bracket or har acket or har acket or har acket or har acket or hardwar dwar dwar dwar dware finish due to corr e finish due to corr e finish due to corr e finish due to corr e finish due to corrosiv osiv osiv osiv osive e e e e
chemical e chemical e chemical e chemical e chemical exposur xposur xposur xposur xposure.

DOWNLOAD

This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s