Toyota Tundra Exhaust System Installation PN 140238 – 140332

Borla Performance Cat-Back™ Exhaust System (Part number 140238 & 140332) has been designed for
the Toyota Tundra Crew Max Short Bed, Double Cab Standard Bed and Regular Cab Long Bed each
equipped with 5.7L V8 engine, two or four-wheel drive and an automatic transmission.

Borla Performance Industries recommends that an exhaust shop or professional after market parts installer perform the installation
of this system. However, if you decide to perform the installation on your own it is recommended that two people are used. This
installation should not be performed by one person due to the risk of injury. Ensure the installers use all under car safety precau-
tions including eye protection.

Please take time to read and understand the following…

By installing your Borla Performance Exhaust System, you indicate that you have read this document and you agree with the terms
stated below.

It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied wi th your
Borla Performance Exhaust System

Borla Performance Industries assumes no responsibility for damages occurring from misuse, abuse, improper installation, improper
operation, lack of responsible care, or all previously stated reasons resulting from incompatibility with other manufacturer’s
products and/or systems.

Included with your Borla Performance Exhaust System is a warranty card. Please read it carefully before you begin any work on
your vehicle. If you should have any questions regarding our warranty policy, installation, or any other matter pertaining to your
new Borla Performance Exhaust System, please give us a call at the number provided on the warranty card.

TOOLS:

1  3/8” Drive Ratchet
2  3/8” Drive Extension 3”
3  15mm Socket
5    Pry Bar

SHOP SUPPLIES:

1  Spray Lubricant

Borla Performance Cat-Back™  Bill of Materials

1. Right front pipe assembly
2. Left front pipe assembly
3. Muffler assembly
4. Left over axle pipe
5. Right tail pipe assembly
6. Left tail pipe assembly
7. Hanger/Bracket assembly (qty 1)
8. Isolator (qty 1)
9. 2.25” clamp (qty 5)

DOWNLOAD

This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s