The radio plug in vehicles a BMW 17 pin or Quodlock plug 40 plug

The radio plug in these vehicles is either a BMW 17 pin or Quodlock plug BMW 40 plug (see pictures)
(translation Picture 2: Connect the lonely black cable to the white one at the mass).
Remove the plug from the back of the radio. Connect the adapter´s cable strand with the vehicle´s and radio´s plug.

If the original plug of the vehicle has more than 4 cables, then you take the original plug and the adapter´s plug both
apart and switch the pins of the adapter plug with those of the vehicle´s plug, which are on the same place.
Plug in the vehicle´s plug at the back of the radio again.
If there´s a short small black cable in the 10 Pin plug of the adapter, you must connect it to the MASS.
INSTALLATION PROBLEMLÖSUNG (resolving installation problems)
You can check the sound of the radio, but you don´t hear it.
– the 10 pin Plug isn´t correctly connected with the radio´s 17 pin Plug. Check out if you used the right socle
BEI NAVIGATION/BLUETOOTH/TV: NO TONE
-Put the pins of the c-quence 10 or 12 Plug in the right places in the original 10 or 12 Plug.
Put the 10 or 12 Pin Plug in the back of the radio.
DAS RADIO DISPLAY ZEIGT (The radio display shows)
NO magazin/irregular Radio Control
-Remove the 3 pin and the 6 pin Plug from the back of the CD changer.
VW/AUDI/SKODA/SEAT INSTALLATION
Important. The fragile black cable of the c-quence cable-tree has to be connected to the chassis of the radio (the
MASS). Normally there is a plug-connector? at the back of the radio, that can be used.
BEI 20 PIN MINI ISO STECKER (BLAU)
Simply put the blue Plug in the `C` socle (Above on the right) at the back of the radio.
BEI 20 PIN MINI ISO STECKER (ROT)
Remove the Mini ISO Plug (if built in) off the back of the radio. Put this in the red socle on c-quence cable strand. Put
the red plug in c-quence in the Mini ISO socle at the back of the radio.
BEI 12 PIN QUADLOCK `C` PLUG (WHITE)
Remove the present Quadlock Plug from the back of the radio (if built in) and replace it by the C-quence cable-strand.
If the original vehicle´s Plug has more than 4 cables, then take the original and the c-quence Plug both apart and
switch the pins of the c-quence with those of the vehicle´s Plug at the same place. Place the vehicle´s Plug back
again at the back of the radio.

DOWNLOAD

This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s