2000 TOYOTA TACOMA 4WD, TRD 2WD INSTALLATION INSTRUCTIONS – KIT 5573

Installation of a Performance Accessories body lift will change the center of gravity and the handling character- istics of the vehicle. Because of the higher center of
gravity and larger tires, the vehicle will handle and react
differently both on and off road.

You must drive it safely!
Extreme care must be taken to prevent vehicle rollover or loss of control, which could result in serious injury or death. Avoid sudden sharp turns or abrupt maneuvers
and always make sure all vehicle occupants have their
seat belts fastened.

1.Read all warnings and instructions completely and
carefully before you begin.
2.Check to make sure the kit is complete (refer to the
Parts List, section E).
3.Only install this kit on the vehicle for which it is
intended. If anytime during the installation you
encounter something different from what is outlined
in the instructions, call technical support at (928)
636-0979.
4.Park the vehicle on a clean, dry, flat, level surface
and block the tires so the vehicle cannot roll in either
direction.
5.Disconnect both battery cables. Disconnect the neg-
ative cable (1) first, then the positive cable (2) from
the battery (3).

B. Get ready to install the kit.
1.Remove the front bumper.
a. Remove two parking light lamps (4) from the park-
ing lights (5).
b. Remove two locknuts (6) from the front bumper (7)
and front fenders (8).

DOWNLOAD

This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s