Installation 2007-2008 Toyota Tundra Mounting Bracket Kit

Quick Connect Capture Plates are available for various king pin box sizes. Contact the Customer
Service Dept. at PullRite for further assistance.

NOTE: 10 bolts are required to fasten the Universal Capture Plate. Make certain they are positioned so
the front row of holes have at least 2 to 3 fasteners, the rear row of holes has 2 fasteners and
each outside row of holes has 2 to 3 as well. Fill in around the kin pin. If you are not able to bolt
into the outside perimeter, you will need to weld on extensions to the king pin plate, both front and
rear. See instructions for “King Pin Boxes That Are Shorter Front to Back.”

I. FOR KING PIN BOXES WITH A FLANGE: (Figure 3)
1. Place the Capture Plate over the king pin, with the guide wedge
towards the rear of the trailer (wedge facing down). Align the
Capture Plate square with the king pin box and clamp in place to
prevent movement.
2. Mark the holes for drilling through the Capture Plate onto the
king pin box flange.
3. Remove the Capture Plate or use it as a guide and drill ¼ “ holes
through the flange.
4. Re-install the Capture Plate (as in step 1).
5. Use the ¼” bolts provided, to secure the Capture Plate onto the
king pin box flange. A minimum of 10 bolts must be used to
fasten the plate on. These fasteners do not count as part of the
minimum number of bolts required. Make certain all the bolts
are flush with the trailer plate. Fasteners that are installed at an
angle catch and “drag” on the 5th wheel plate surface, weakening
the integrity of the fastener.
6. If the Capture Plate extends beyond the king pin box, then install
the braces {K2-K4} as shown in Figure 4. These fasteners do not
count as part of the minimum number of bolts required.

Universal Capture Plate Installation 3-4
Template and Truck Bed Layout Method 5
Mounting Bracket Install Instructions 6-7
Installation Photos #1 & #2 8
Installation Photos #3 9
2007-2008 Toyota Tundra Assembly — Exploded View 10
Parts List

DOWNLOAD

This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s